We make sure the inner surface is smooth and consistent in shape to avoid hot spots or poor fit. Belt heaters are made to order as they vary in size and performance. The area from which heaters are used is often exposed to liquids, and therefore the wires can be completed with a protective cable. Cables can be installed from the front or edge of the heater to facilitate the installation of heaters in areas where space is limited. Cables can also be installed from a terminal housing and a braided metal jacket for additional protection if required.
The elements are susceptible to moisture and must be stored or used in a dry environment. It is recommended to gently heat the elements after a long period of operation. This allows moisture to escape and prevent damage to the elements.
For heaters with multiple straps, alternately tighten each belt until no additional tightening can be performed. Make sure that all surfaces of the barrel are clean and free of contaminants that can enter the heater through wiring, etc. to avoid electrical short circuits and/or heating failures. If thermocouples are part of the heater, make sure they are free of contaminants and have a good response to temperature changes to avoid overheating.
They usually contain terminal kits that facilitate installation. Belt heaters are used for injection molding drums and nozzles, extrusion and molding presses, pipe heating, heat treatment and autoclaves, food industry and other applications. Belt heaters are efficient and economical solutions for the heating needs of many Industrial Band Heater Manufacturer applications. An expanding mica belt heater is an internally mounted belt heater that is especially useful when it only provides space for an item in a pipe or heating tool. Mica belt heaters are widely used for plastic injection molding and contact heating in machines, nozzles, tools, piping systems, and blow molds.
In this case, it is advisable to use a “flexible band” or a hinged element. IHP provides heating systems, control systems and industrial services to many leading industrial companies in Europe. As a partner and supplier, we are known for our flexibility and high quality. For the past eight years, our field service has been on site within 24 hours of the first call within 24 hours, more than 98% of the time. Experience best-in-class performance with heat and process components that increase the efficiency of any system.
Notched edges fold to secure the ends, and a protective lining ensures the placement of the tiles. This combined set of ceramic belt heating provides a flexible heating system that generates efficient transmission of conduction and radiant heat. Like many maintenance products used in the plastic injection molding industry, belt heaters are often not in the foreground until a problem occurs.